The i range of gas detectors are used in various applications such as boiler/plant rooms, hospitals, laboratories and high rise buildings. These sensors are specifically built to work with all Merlin control panels and can also be used direct with BMS control panels. The traffic light indicator will summarise the gas levels. Green = safe | Yellow = Attention | Red = Danger.
| DETECTOR i SPECIFICATION | |||
|---|---|---|---|
| GENERAL | MECHANICAL | ||
| Model | Detector i | Size (H x W x D) | 5.95 x 4.37 x 1.97” (151 x 111 x 50mm) |
| Target Gas | CO, CO2, LPG, NG, H2S | Housing Material | ABS PA765. Flame Retardant UL 94V-1 |
| Mounting | Safe Zone – Indoor use – Wall Mounted | Weight | 212g |
| USER INTERFACE | POWER & RELAYS | ||
| Display | N/A | Rated Power | 0.6W Max |
| Screen Brightness | N/A | Rated Voltage | 12-24Vdc or 24Vac |
| Visual Indicators | Power (Green), Low Alarm (Yellow), High Alarm (Red), EOL (Yellow) | Volt Free Relay | 1A switching current @ 24V AC/DC |
| Audible Alarm | >65dB @ 3.28ft (1m). Quiet conditions. | ||
| Language | English | ||
| ENVIRONMENTAL | WIRING & COMPLIANCE | ||
| Ingress Protection (IP) | Not Formally Evaluated | Wiring | Typical Min. 2.5mm² / 75°C min / Tinned copper |
| Operating | -10 ~ 50°C / 20 ~ 90% RH (non-condensing) | Electrical Safety & EMC | CE / UKCA, BS EN 61010-1:2010 +A1:2019, BS EN 50270 |
| Storage | 0 ~ 50°C / 30 – 80% RH (no condensation) | Altitude Rating | 2000m |
